How do you calculate ground bearing pressure for a crane?
Simply divide the maximum outrigger load by the allowable ground bearing pressure to determine the pad area you need. Example: Maximum outrigger load = 100,000 lbs. Allowable ground bearing pressure = 3,500 psf. (100,000 lbs / 3,500 psf = 29 ft2 of area).
How do you calculate the stability of a crane?
The formula for calculating Leverage is simple. Simply take the weight of your crane and multiply it by the distance from the center of gravity to the tipping point. Then calculate the distance from the object being lifted to the tipping point and multiply that by the weight of the object.
How do you calculate mat size for outrigger loads?
General Calculations to Determine the Correct Outrigger Pad (Blocking) Size:
- Rule of 5: Take the maximum lifting capacity in tons of the unit such as 50 tons, divide that by 5 = 10 sq. ft. of cribbing or blocking.
- Rule of 3: Take the square footage of the cranes fl oats and multiply by 3. Such as a 2×2 fl oat = 4 sq. ft.
How are outriggers calculated?
Multiply the square of the radius of one of the outrigger pads by pi to obtain its surface area. The radius of the pad is equal to half of its diameter. Be sure to use the same system of measurement, metric or English standard, that you used in Step 1.
How do you calculate ground pressure?
Average ground pressure can be calculated using the standard formula for average pressure: P = F/A. In an idealized case, i.e. a static, uniform net force normal to level ground, this is simply the object’s weight divided by contact area.
What is the ground bearing pressure?
The ground bearing pressure or bearing capacity of soil is important because whenever a load is placed on the ground, such as from a building foundation, a crane or a retaining wall, the ground must have the capacity to support it without excessive settlement or failure.
How is crane load capacity calculated?
Measure geometric components
- The standard calculation for maximum crane capacity is (r)(hC)/100.
- R = Radius between the ground and load.
- hC = Lifting height multiplied by the capacity.
What is the tipping point of a crane?
The point of balance (impending tipping) is as follows: “A condition of crane loading where the load moment acting to overturn the crane is equal to the moment of the crane resisting overturning.”
What is outrigger in crane?
Outrigger: A beam which extends from the lower works of a crane to increase the crane’s stability. The beams may be either extendible/retractible or fixed length and typically utilize some type of pad to distribute loads to the ground surface. ( Source: A Glossary of Common Crane and Rigging Terms.
What is crane cribbing?
OSHA 1926.1401 Blocking (also referred to as “cribbing”) is wood or other material used to support equipment or a component and distribute loads to the ground. It is typically used to support lattice boom sections during assembly/disassembly and under outrigger and stabilizer floats.
How do you calculate ground pressure in psi?
What is the weight of the Link Belt Cranes?
Weight 1,028 lb(466kg) Weights includes extension, pendants, wear bar, and mounting hardware. L D L D H D H L W H W W 13 5803- 0421- T1 Link-Belt Cranes 348 Series 2
What is the load on a 348 Series 2 Link-Belt crane?
5803- 0421- T1 348 Series 2 Link-Belt Cranes Jib Attachment Load Chart – Extended Gauge + 100 ft (30.48m) Heavy Duty Boom With Combo Top + 100 ft (30.48m)Offset Tube Jib – Extended Gauge (22”) – 360° Rotation ABC + A [227,560 + 75,400 lb(103 219 + 34 201kg)] Counterweight [All capacities are listed in kips (mt)]
What is the working range of a T1 Link Belt crane?
5803- 0421- T1 Link-Belt Cranes 348 Series 2 Working Range Diagram – Long Range Boom – Extended Gauge 270’ 260’ 250’ 240’ 230’ 220’ 210’ 200’ 190’ 180’ 170’ 160’ 150’ 140’ 130’ 120’ 110’ 100’ 90’ 80’ 70’ 60’ 50’ 40’ 30’ 20’ 10’ Ground Level Notes: 1.
Do you offer access to the Link-Belt crane site?
We also offer access to only the ground bearing forces site for engineers and other lift planners who may not be Link-Belt crane owners. Click here to apply to only the ground bearing forces site.