Can you install a toilet on tile floor?

Can you install a toilet on tile floor?

Can you install a toilet on tile floor?

Caulk Around the Bowl Caulk around the base of the bowl with silicone caulk. Use clear caulk or one with a color that matches the toilet or the tiles. Once it dries completely, you’ll be able to install a toilet on the tile floor.

Does the toilet flange sit on top of tile?

The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too. The spacing of the toilet exit “horn” and sealing surface is designed for this height.

Should I grout under the toilet?

If the toilet sits securely to the floor without rocking or leaving any noticeable gaps, it is not technically necessary to grout or caulk the toilet to the floor. This is a matter of aesthetics and personal preference.

How high should toilet flange be above tile floor?

Check the Flange Height With the toilet removed, you can see the toilet flange and measure its height above the floor. The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.

Do you tile under the toilet or around it?

The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.

Can a toilet flange sit above the floor?

With the toilet removed, you can see the toilet flange and measure its height above the floor. The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.

How to easily install vinyl flooring around a toilet?

Tube of flooring caulk

  • Vinyl floor tiles
  • Pencil
  • Scissors
  • Cleaning solution
  • How to install a new toilet?

    Toilet Parts: An Overview

  • Prep the Floor and Soil Pipe. Stuff a rag into the soil pipe to block sewer gas and prevent hardware from falling in.
  • Install the Soil Pipe and Closet Flange.
  • Solder the Stop Valve.
  • Install Toilet Wax Ring,Set the Bowl.
  • Install the Tank.
  • Install the Supply Line and Seat Assembly.
  • Finishing Touches.
  • How to replace an old toilet?

    Replace the Toilet. Place the toilet bowl atop the new flange, aligning the bolt holes in the base of the bowl with the flange bolts. Holding the bowl by the inside rim may help you get a better grip. Lower the bowl down and apply pressure to set the seal.

    Can you put vinyl plank flooring under a toilet?

    Toilets are manufactured to allow a toilet flange to sit up under the toilet, so the bottom of the flange and bottom of the toilet are at the same height. This allows for a proper connection when a wax seal is installed in between the toilet and flange. There are instances where a vinyl floor is installed right up to the side of the flange and typically this isn’t a problem.