How do I set up a RAID controller card?
Configure RAID Controller in BIOS
- Reboot the server and press F2 when the Sun Logo appears.
- In the BIOS Setup utility dialog, select Advanced –> IDE Configuration .
- In the IDE Configuration menu, select Configure SATA AS , then press Enter.
- In the SATA Options menu, select RAID , then press Enter.
How do I set up RAID mode?
The RAID option must be enabled in the BIOS before the system can load the RAID option ROM code.
- Press F2 during startup to enter the BIOS setup.
- To enable RAID, use one of the following methods, depending on your board model. Go to Configuration > SATA Drives, set Chipset SATA Mode to RAID.
- Press F10 to save and exit.
How do I enable RAID on Asus?
- Power on the system and press“delete”key to enter BIOS [Advanced Mode]
- Click [Advanced] page and click [SATA Configuration] item.
- Click [SATA Mode] item and set to [RAID],as below picture mark red 1.
- Click [Boot] page and set [Launch CSM] item to [Disabled]
- Press F10 key and click OK ,then the system will auto reboot.
Should I enable RAID mode?
If you are using multiple hard drives, RAID is a better choice than AHCI. If you want to use an SSD plus extra HHDs under RAID mode, it’s recommended that you continue using RAID mode.
Should I set SATA to RAID mode?
If you are using a SATA SSD drive, AHCI may be more suitable than RAID. If you are using multiple hard drives, RAID is a better choice than AHCI. If you want to use an SSD plus extra HHDs under RAID mode, it’s recommended that you continue using RAID mode.
How do I setup RAID in Windows 10?
Configuring RAID in Windows 10
- Type or paste ‘Storage Spaces’ into Search Windows.
- Select Create a new pool and storage space.
- Select the RAID type under Resiliency by selecting the drop down menu.
- Set the drive size under Size if necessary.
- Select Create storage space.