How do you hook up a HID conversion kit?

How do you hook up a HID conversion kit?

How do you hook up a HID conversion kit?

  1. Step 1 Headlights.
  2. Unplug the stock harness and remove the headlights.
  3. Remove battery negative terminal.
  4. Take out the HID bulb from the plastic shell and remove the circular plastic piece.
  5. Screw in the HID bulb back into the headlight housing.
  6. Before you mount the ballast, test the HID light to make sure it lights up.

Can I install HID bulbs to the stock headlights?

Can I put HID bulbs in my stock LED headlights? No. HID headlight conversion kits are only designed to work with stock halogen bulbs and assemblies.

How do you fit HID bulbs?

Identify the bulb type (D2S, D2R, D1S, D1R, D3S, D3R, D4S, or D4R) and replace with the same type. Replace bulbs in pairs to ensure colour match. After replacing the bulbs, plug the connector back on the bulb, ensuring that it is pushed fully home and locked in place. Replace the cover over the rear of the HID bulb.

Do you need a conversion kit for HID headlights?

‘ The short answer is yes, but you’ll need to use an HID Conversion Kit. Xenon HIDs won’t fit into spaces that are designed for halogen bulbs, and vice versa.

What is a HID conversion kit?

HID conversion kits are promoted as an aftermarket upgrade for halogen lights. The HID gas discharge burner is equipped with a halogen bulb-type base, allowing it to be fitted within a headlamp housing that contains optics designed only for filament bulbs.

What are the benefits of a hid conversion kit?

With this HID Conversion Kit, your headlights’ output will be much brighter and you’ll get a clean, crisp look. There is no heavy modification involved so converting to HID is a great upgrade, even for beginners. Did you make this project? Share it with us!

Can I convert my headlights to hid?

If you’re tired of your halogen headlights or fog lights and want to upgrade to something with a better output, try installing an HID Conversion Kit. No tools specified.

How do you install a HID ballast on a Honda Accord?

Screw in the HID bulb back into the headlight housing. Connect the wires of the HID bulb to the ballast and then connect the HID ballast back to the stock harness. Before you mount the ballast, test the HID light to make sure it lights up.

Can I use a 9006 relay harness for a HID bulb?

And by using the extension power cord comes together the HID bulb, you can also install this relay harness for any other bulb sockets such as H1, H3, H4, H7, H8, H11, H13, 9004, 9007, 880, 5202, P13W and more. If you don’t have the extension cord from the HID bulb, you can still use this 9006 relay harness by removing its existing socket