How much does a water jet cutting machine cost?
For starters, you can find small waterjet machines at a price point of $60,000. However, those might not give you the best value for money in the long run. If you want to make the most out of your investment, we recommend going with the Techniwaterjet G2 CNC waterjet cutters which starts at $100,000.
How much does an OMAX waterjet cost?
When you are attempting to win a grant to supplement the cost of a waterjet, which can start as low as $23,950, be sure to have the exact make and model of the waterjet you want to acquire to ensure you write your funding goals and priorities to be as specific as possible.
Can water jets cut stone?
Stone and Tile The waterjet cutting process is suitable for the precision cutting of any stone material. As with glass, conventional cutting methods are very limited in their ability to cut stone into anything but simple shapes.
Why do stone cutters use water?
In stone cutting, polishing, and finishing, water is a vital part of stone cutting and quarry operations. It helps to keep tools from overheating and reduces dust from operations. Water used in this process must be treated before it can be used again.
How much does a CNC water jet cost?
Pricing for small waterjet cutting systems can start around $60k and complete custom systems can reach into the millions. It all depends on your application. You should also factor delivery and disposal costs into your cost for abrasive.
Why are water jet cutters so expensive?
Consumable materials such as water, fuel, and abrasive material also add to the overall expense. That’s the raw expense alone. The pressure level also increases the cost significantly. Thicker materials require more power to cut, and it also needs more time.
Is water jet cutting expensive?
Therefore, on average, you are going to be spending between $18 to $36 per hour on abrasive. Assuming 6 hours of cutting time per day, that’s $110 to $220 of abrasive per day, or $550 – $1,100 per week, $2,200 to $4,400 per month, $26,000 to $55,000 per year.
How thick can you cut with a water jet?
How thick can an abrasive waterjet cut? The high-level answer is that abrasive waterjets can cut through 12 inches of most materials. Many users report cutting material even thicker than that. Most abrasive waterjet cutting, however, is done in material that is 3 inches thick or less.
Can a water jet cut granite?
High pressure water jet, combined with a CNC cutting table, is specially useful for cutting stones such as marble and granite. Other materials that waterjet cutter can cut includes glass, ceramic tile, and concrete bricks, etc.
What material can water jet cut?
Waterjet machines cut all types of metals: hardened tool steel, aluminum, titanium, and a host of exotic metals that prove difficult to cut with other tools or processes. Cutting with a waterjet produces a smooth edge with no burn marks, cracking or excess burrs.
How many PSI is a water jet cutter?
between 50,000 and 60,000 PSI
Typical waterjet cutting pressure is between 50,000 and 60,000 PSI. Many newer systems are pressurized up to 90,000 PSI. The water at this pressure is then released through a small orifice machined into a diamond or saphire, usually in the range of 5 to 15 thousandths of an inch diameter.
How does a water cutter work?
Waterjet cutting is simply an accelerated erosion process within a selected material. Highly pressurised water is fired through a ruby or diamond nozzle into a mixing chamber. This pressure creates a vacuum and draws garnet sand into the stream where it is then fired at the object in place for cutting.