What is Yamaha pre rig?
Yamaha Outboard Cables The process of routing the wires and outboard control cables can be a challenging task, to say the least. This is why many manufacturers install the wiring harness and cables when the boat is initially assembled, which is known as pre-rigging.
Can I use mercury controls on a Yamaha?
Sure you can. We have a Merc / Yamaha (Merc-aha) 225 4-stroke on our harbor boat with Merc controls / guages. Merc came up with an adaptor for the merc controls / wiring to plug into the Yamaha.
What is Y cop Yamaha?
Y-COP is all plug-and-play, and can be added after the fact as an option on any Yamaha outboard that runs the Command Link or Command Link Plus gauges. You need to have an authorized Yamaha Marine Dealer install the system and enable it. Y-COP functionality is already built-in on the Helm Master system.
What is Yamaha Command Link Plus?
Command Link Plus is a rigging system that includes wiring harnesses, network hub(s) and components. This system creates a computer network on a boat, and all the Yamaha components use the network to communicate between devices.
What does Yamaha Command Link do?
Command link is a rigging system that includes wiring harnesses, network hub(s) and components. This system creates a computer network on a boat, and all the Yamaha components use the network to communicate between devices.
What does the Yamaha Gateway do?
Yamaha’s Gateways allow certain engine and boat data to be displayed on NMEA-2000 compatible displays that are external to the Yamaha system. The Gateway is for installation with Command Link or Command Link Plus networks, such as those found with mechanical or DEC (digital electronic) controls.
What is Yamaha set point?
Set Point uses a dual-antenna GPS to engage its three primary modes: Stay Point, Fish Point and Drift Point. Stay Point keeps the boat close to a specific spot and maintains position and heading, like a virtual anchor.
How does helm master ex work?
Simply identify your chosen fishing location and hit the FishPoint® button. Helm Master® EX then takes over using minimal engine RPM and the electric steering to hold your position. The vessel can move in 1.5, 3 or 6 metre increments (preset in the gauge) with a bump of the joystick forward, reverse or to either side.
What is throttle friction adjustment?
Adjust the throttle friction with the adjustment screw that’s typically below the throttle on the tiller. Set it until you feel a slight drag on the handle when accelerating or decelerating. Clockwise increases friction, and counterclockwise decreases it.