How do I reset my Brother HL-2140?

How do I reset my Brother HL-2140?

How do I reset my Brother HL-2140?

Reset the settings to factory default

  1. Power the machine off.
  2. Press down the GO button and power the machine on.
  3. Keep pressing GO until the Toner, Drum, and Error LEDs are on.
  4. Release GO. All LEDs will be off.
  5. Press GO eight times. Your machine’s printer settings will be reset.

How do I change the toner on a Brother printer HL-2140?

FAQs & Troubleshooting

  1. Make sure that the printer is turned on.
  2. Slowly but firmly pull the drum unit and toner cartridge assembly out of the machine.
  3. Push down the green lock lever and take the toner cartridge out of the drum unit.
  4. Unpack the new toner cartridge.
  5. Pull off the protective cover.

How do you fix a paper jam in Brother HL-2140?

Clear paper jams.

  1. Open the front cover and leave the machine for at least 10 minutes to cool down.
  2. Slowly take out the drum unit and toner cartridge assembly.
  3. Close the front cover.
  4. Pull the paper tray completely out of the machine.
  5. Use both hands to slowly pull out the jammed paper.

How do I override my brother toner life ending?

Press the ‘go’ button (or ‘start’ button) 5 times. The toner light should be off (the error may be flashing). The paper light should be on or flashing.

How do you clean a Brother HL 2140 Drum?

Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off. Put the toner cartridge firmly into the drum unit until you hear it lock into place. Install the toner cartridge and drum unit assembly back into the machine.

Why is my Brother printer not picking up paper?

The Brother machine is out of paper or paper is not properly loaded in the paper tray. Do one of the following: Refill the paper in the paper tray (Click here to see how to load paper in the paper tray.) Remove the paper and load it again.

How do you remove a paper jam from a Brother laser printer?

Follow these steps:

  1. Unplug your Brother machine from the AC power outlet (electrical socket).
  2. Pull the paper tray (1) completely out of your Brother machine.
  3. Pull out the jammed paper (1).
  4. Lift the Jam Clear flap, and remove the jammed paper.
  5. Put the paper tray firmly back in your Brother machine.